MEUS Racing 1/18 TRX4M Ripper Nylon Injection Molding V2 Version Nylon Cage Body Shell for 1/18 TRX4M
1/18 TRX4M ripper Features
- 1. The body is made of PA66 nylon plastic material injected through the mold. Fine detail performance, solid structure, good toughness, light, and strong, can protect the remote control car from collision damage.
- 2. The whole surface is frosted, and the structure is built in a disassembled way.
- 3. With cockpit design, configuration of pull stickers, and assembly instructions.
- 4. With nylon lateral servo seat and stainless steel steering link.
- 5. Suitable for Traxxas TRX 4M High trail.
- 6. The TRX4M ripper fits the TRX4M stock chassis, but you need to cut and install the horizontal servo mount.
Package List
2. This ripper doesn't work with the TRX4M LCG chassis. The TRX4M Ripper does not require a frame beam, so the two are not used together. The Ripper skid plate is fixed, it is a cage structure.
3. This ripper doesn't work with MEUS 2-Speed transmission.
LED Bar:
1. The light bar shell is a metal structure that is strong and durable;
2.16 RGB full-color lamp beads, with 8 RGB light modes, support CH3 control (If your TRX4M replaced the remote control, and has a CH3 channel)and CH1 control ( by forward rapid rotation 3 times to achieve lighting mode switching), easy to operate;
3. The integrated control circuit, the receiver takes power, plug, and play;
4. 5 to 8.4V ultra-wide voltage;
5. With Power off memory, save mode;
Angel Eyes:
1. Integrated controller, remote control switching mode;
2. 12 modes loop control, power off memory mode;
3. Double lighting, inner white light with a polymer lens, outer ring adopts separate RGB lamps;
4. 12 Modes: White inner/Red outer/Orange outer/Yellow outer/Green outer/Blue outer/Cyan outer/Purple outer/Outer scrolling/Outer flashing/Inner flashing/Gradiens.
Light Bar & Angel Eyes Video Shows
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
1/18 TRX4M ripper Features
- 1. The body is made of PA66 nylon plastic material injected through the mold. Fine detail performance, solid structure, good toughness, light, and strong, can protect the remote control car from collision damage.
- 2. The whole surface is frosted, and the structure is built in a disassembled way.
- 3. With cockpit design, configuration of pull stickers, and assembly instructions.
- 4. With nylon lateral servo seat and stainless steel steering link.
- 5. Suitable for Traxxas TRX 4M High trail.
- 6. The TRX4M ripper fits the TRX4M stock chassis, but you need to cut and install the horizontal servo mount.
Package List
2. This ripper doesn't work with the TRX4M LCG chassis. The TRX4M Ripper does not require a frame beam, so the two are not used together. The Ripper skid plate is fixed, it is a cage structure.
3. This ripper doesn't work with MEUS 2-Speed transmission.
LED Bar:
1. The light bar shell is a metal structure that is strong and durable;
2.16 RGB full-color lamp beads, with 8 RGB light modes, support CH3 control (If your TRX4M replaced the remote control, and has a CH3 channel)and CH1 control ( by forward rapid rotation 3 times to achieve lighting mode switching), easy to operate;
3. The integrated control circuit, the receiver takes power, plug, and play;
4. 5 to 8.4V ultra-wide voltage;
5. With Power off memory, save mode;
Angel Eyes:
1. Integrated controller, remote control switching mode;
2. 12 modes loop control, power off memory mode;
3. Double lighting, inner white light with a polymer lens, outer ring adopts separate RGB lamps;
4. 12 Modes: White inner/Red outer/Orange outer/Yellow outer/Green outer/Blue outer/Cyan outer/Purple outer/Outer scrolling/Outer flashing/Inner flashing/Gradiens.
